Last updated: 2026-11-19
Engine & powertrain
Ford Fusion Transmission Problems
Cracked flex plates lead Ford Fusion transmission complaints, along with slipping, hard shifts and shifter faults, often with no warning light.

- Owner complaints
- 196
- Share of all complaints
- 16%
- Crash / fire / injury reports
- 2 / 0 / 0
- Related recalls
- 0
Ford Fusion transmission complaints by model year
The 2018 model year has the most transmission complaints by a wide margin, and it also has the highest rate per vehicle sold. The 2019 and 2020 years have fewer complaints and are closer to each other. None of the three is clean. Flex plate cracks show up in all of them, and the shift dial trouble is most tied to 2018. Fusions from 2018 through 2020 should all be inspected the same careful way.
| Model year | Complaints | Per 10,000 sold | Crash, fire, injury reports |
|---|---|---|---|
| 2018 | 92 | 5.3 | 1, 0, 0 |
| 2019 | 54 | 3.3 | 0, 0, 0 |
| 2020 | 50 | 4.5 | 1, 0, 0 |
Owner complaints filed with NHTSA under power train. Newer model years have had less time to collect complaints.
What goes wrong
A cracked flex plate, the part between the engine and transmission, is the most common failure here on the 2018 to 2020 Fusion. It starts as a rattle or tick at idle that gets louder and can sound like engine knock. Other complaints describe slipping as if in neutral, hard shifts, shudders, fluid leaks, and a rotary shift dial that sticks in Park or drops back into Park by itself.
The safety side is real. Cars lost power in traffic or on the highway, and some could not be driven at all. Most complaints say no warning light came on first. Federal complaint records include a crash in a 2018 where the car moved unexpectedly in reverse and a crash in a 2020 that rolled out of Park on a slope into a house. No fires or injuries are reported in this area. A car that will not hold Park or loses drive without warning is a hazard, so a rattle should be checked soon.
Symptoms owners report
Cracked flex plate rattle
A rattle or ticking near the back of the engine, loudest at idle, that grows over days. It can sound like engine knock. Heavy vibration and power loss follow in some cars. Warning lights usually stay off, and some cars crack again after repair.
Slipping and harsh shifts
The car acts as if it dropped into neutral while in Drive, or it shifts hard from 2nd to 3rd and 4th to 5th. Complaints also mention shudders, torque converter faults, and a car that will not accelerate when merging.
Shift dial stuck or wrong
The rotary dial will not leave Park, will not select a gear, or the car drops back into Park on its own. Some drivers saw a blinking P and a shift system fault message. Others report the car rolling out of Park.
Internal noise and failure
Rattling or screeching under acceleration points to a failing transmission. Full replacements are reported, and some cars fail again after the swap. One owner said the transmission failed completely and was not covered by Ford.
Hidden fluid leaks
Transmission fluid leaks with no dash warning. In one 2020, a failed cooling line leaked into insulation wrapped around the pan, so nothing dripped on the ground. Other complaints describe small leaks with slipping gears and a whining sound.
When the problems start
Problems show up across a wide range. Flex plate cracks are reported from about 40,000 to 91,000 miles, and 2019 reports run from about 52,500 to 84,000 miles. Full transmission replacements are reported from about 40,600 miles. One 2018 shift dial stuck in Park began at 40,000 miles. Nothing in the complaints suggests a mileage after which a Fusion is safe from these faults.
Repairs and recalls
Federal recall records list no recalls in this area. Dealers replaced flex plates, and some repairs also covered the torque converter and transmission pump. One owner says Ford covered repeat flex plate failures under warranty. Others paid out of pocket or were turned down for goodwill help. Drivers of 1.5L cars say a Ford customer satisfaction program was refused for them. Some replacement transmissions failed again. Independent repair-cost data puts the whole model's estimated annual repair cost at $581, but these jobs cost far more.
Checking a used Fusion for transmission problems
- Listen at idle with the hood up and the engine warm for any rattle, tick, or knock near the back of the engine.
- Cycle the shift dial through every gear several times, and confirm it holds Park on a slope.
- Test drive through all gears, braking and accelerating. Feel for slipping, shudder, or hard shifts between 2nd and 3rd.
- Ask for service records showing any flex plate, torque converter, or transmission work, and who paid.
- Have a shop inspect the pan area and cooling lines for fluid, since leaks can hide under insulation.
- Run the VIN through a Ford dealer and ask whether any customer satisfaction program covers that exact engine.
For the rest of the car, use a full Ford Fusion inspection checklist.
A VIN check shows whether the car you're looking at had its recall work done, plus accident and title history.
Ford Fusion Transmission Problems: common questions
- Which Ford Fusion years have the most transmission complaints?
- The 2018 model year has the most, with 92 complaints. The 2019 has 54 and the 2020 has 50. The 2018 also has the highest rate per 10,000 sold. All three years report cracked flex plates, so none should be treated as free of the problem.
- Is it safe to drive a Fusion with a cracked flex plate?
- Complaints describe losing power at highway speed and cars that could no longer be driven. Warning lights often stay off, so the rattle is the main clue. Owners warn it could shatter while driving. Get any rattle checked promptly instead of driving on it.
- Is there a recall for Ford Fusion transmission problems?
- Federal recall records list no recalls in this area. Some owners mention a Ford customer satisfaction program that covered flex plates on certain cars, but they say 1.5L cars were refused. Check your VIN with a Ford dealer to see what applies.
- What does a Ford Fusion transmission repair cost?
- The data gives no repair prices for transmission work. Many owners say they paid themselves after warranty ended, and some say Ford declined goodwill help. Repeat failures are reported after both flex plate and transmission repairs, so ask what the shop warranty covers.
- Why does my Fusion stick in Park?
- Complaints describe the rotary shift dial refusing to leave Park, refusing gears, or dropping back into Park on its own. One 2019 owner saw a blinking P and a shift system fault message. Worn shifter cable bushings are also reported to keep the car from shifting or staying in Park.
Other Ford Fusion problems
Engine & powertrain
Electrical & lighting
More on the Ford Fusion
See incorrect data? Report an issue