Last updated: 2026-11-19

Brakes, steering & tires

GMC Sierra 1500 Brake Problems

GMC Sierra 1500 brake problems most often mean sudden loss of power brake assist, with a hard or sinking pedal and a Brake System Failure warning.

GMC Sierra 1500
Owner complaints
254
Share of all complaints
7%
Crash / fire / injury reports
10 / 2 / 6
Related recalls
7

GMC Sierra 1500 brake complaints by model year

The 2019 model year leads by a wide margin with 99 complaints, and it also has the highest rate per vehicle sold. The 2018 and 2020 trucks follow with 37 and 40. Counts then fall, to 20 for 2021 and into single digits for 2025. Part of that drop is time on the road, since newer trucks have had less time to collect complaints. The 2026 truck is too new to judge. Newer-year reports still describe the same sudden loss of braking.

Most complaints Other yearsRate = complaints per 10,000 sold
GMC Sierra 1500 brake complaints by model year
Model yearComplaintsPer 10,000 soldCrash, fire, injury reports
2018372.11, 0, 0
2019995.33, 0, 3
20204023, 1, 3
20212011, 1, 0
2022231.20, 0, 0
2023140.61, 0, 0
2024100.41, 0, 0
202570.20, 0, 0
20264n/a0, 0, 0

Owner complaints filed with NHTSA under service brakes, parking brake. Newer model years have had less time to collect complaints.

What goes wrong

The core complaint is brake assist that cuts out without warning. The pedal turns hard or sinks toward the floor, and the dash fills with Brake System Failure, Service ESC, trailer brake, and reduced steering assist messages. A restart often brings the brakes back for a while, then the fault returns. Dealers sometimes cannot reproduce it. Other owners report trailer brake warnings with no trailer attached, and pads and rotors that wear out early.

This is a safety problem, not a nuisance. Owners describe very long stopping distances, trucks coasting through stop signs, and rear wheels locking at highway speed. Crash reports appear in most model years, including a low-speed rear-end crash after a "brake failure" message and a fatal crash that also involved a fire. One fire was blamed on the trailer brake controller. Some trucks were capped at a top speed of 62 mph or lower. Fixes often did not hold, so a truck can return to the dealer repeatedly.

Symptoms owners report

Sudden loss of brake assist

The pedal turns rigid or sinks, and the truck takes far longer to stop. Warnings such as Brake System Failure, Service ESC, and reduced steering assist light up together. Owners often report it right after startup or at highway speed.

Top speed limit and limp mode

The dash can show a speed cap such as 62 mph, and some owners report 43 mph. Shutting the truck off sometimes clears it for a while. Dealers often cannot reproduce it, and the warnings tend to return.

Trailer brake warnings and dropouts

A repeating Service Trailer Brake System warning and chime shows up even with no trailer attached, and a trailer brake fuse can keep blowing. When towing, the integrated controller can shut off, leaving the trailer without brakes.

Rear wheels locking without input

Owners report the rear wheels locking at about 60 mph or higher with no brake pedal pressed. Others describe brakes grabbing for a second or two when accelerating or downshifting, or an ABS lockup that spun the truck.

Early pad and rotor wear

Front pads wear fast in some trucks, and rotors warp, bringing vibration and pulsing. One owner found the inner pads worn twice as much as the outer ones. The electronic parking brake is also blamed for dragging.

Truck moves forward with brake pressed

Some 2018 owners describe the truck creeping or lunging forward with the pedal pressed, tied to hard transmission engagement. One such case ended in a low-speed crash. Isolated reports also mention a 2024 truck accelerating on its own when braking.

When the problems start

Many failures hit very early. Owners report problems within 120 miles of purchase, under 1,250 miles, and at 4,200 miles. Some 2025 failures arrive before 13,000 miles. Others come around 15,700 miles. Master cylinder replacements show up at 9,700 to 23,403 miles, including 21,539 and 22,500. Early pad and rotor wear is reported before 30,000 miles.

Repairs and recalls

Dealer fixes reported by owners include recalibrating the brake system, a new electronic brake module, and a new master cylinder and booster. Warnings often return after a reflash. One 2022 truck failed again after repair. Owners with trailer controller trouble say dealers cite a GM bulletin with no fix. Federal recall records list seven brake-area recalls. They cover vacuum pump assist (2018), EBCM software errors (2018, 2019), caliper bolts (2020), and a missing brake fluid warning (2023). Remedies are free of charge. Costs are not given in the data.

Model yearsCampaignProblem
202324V674000General Motors, LLC (GM) is recalling certain 2023 Chevrolet Silverado 1500, GMC Sierra 1500, 2023-2024 Chevrolet Tahoe, Suburban, GMC Yukon, Yukon XL, Cadillac Escalade, and Escalade ESV vehicles. The electronic brake…
202020V116000General Motors LLC (GM) is recalling certain 2020 Chevrolet Silverado 1500 and GMC Sierra 1500 vehicles. The bolts used to attach the front and/or rear brake calipers may have not been heat treated and may break under…
201920V055000General Motors LLC (GM) is recalling certain 2019 Chevrolet Silverado 1500 and GMC Sierra 1500 vehicles. These vehicles received updated software for the Electronic Brake Control Module (EBCM). This software has an…
201919V889000General Motors LLC (GM) is recalling certain 2019 Chevrolet Silverado 1500, Cadillac CT6, and GMC Sierra 1500 vehicles. Due to an Electronic Brake Control Module (EBCM) software error, the vehicle's Electronic…
201820V603000General Motors LLC (GM) is recalling certain 2018 Cadillac Escalade, Chevrolet Silverado 1500 and Tahoe, GMC Sierra 1500 and Yukon vehicles equipped with either a 5.3L or 6.2L V8 engine. The output of the mechanical…
201819V761000General Motors LLC (GM) is recalling certain 2015-2020 Chevrolet Suburban, Tahoe, and GMC Yukon, and 2014-2018 Chevrolet Silverado 1500 and GMC Sierra 1500 vehicles equipped with a 5.3-liter engine, a 3.08-ratio rear…
201819V645000General Motors LLC (GM) is recalling certain 2015-2017 Cadillac Escalade, 2014-2018 Chevrolet Silverado, GMC Sierra, 2015-2018 Chevrolet Suburban, Tahoe, GMC Yukon vehicles. The amount of vacuum created by the vacuum…

Checking a used Sierra 1500 for brake problems

  • Run the VIN through the NHTSA recall lookup and confirm every brake recall repair is done, including the EBCM reprogramming.
  • Ask for service records showing master cylinder, booster, or brake module replacements, and treat repeat visits as a warning sign.
  • Cold start the truck, then watch the dash for Brake System Failure, Service ESC, or trailer brake messages before you drive.
  • On the test drive, press the pedal hard at low speed and check for a firm, steady feel, pulsing, or pulling.
  • Inspect pad thickness on the inner and outer sides and look for warped rotors, especially on 2019 and 2020 trucks.
  • If you plan to tow, test the trailer brake controller with a trailer connected and watch for disabled messages.

For the rest of the car, use a full GMC Sierra 1500 inspection checklist.

7 brake recalls cover the GMC Sierra 1500. A VIN check shows whether the car you're looking at had its recall work done, plus accident and title history.

Look Up a VIN →

GMC Sierra 1500 Brake Problems: common questions

Which GMC Sierra 1500 years have the most brake problems?
The 2019 model year has the most brake complaints by a wide margin, with 99, followed by the 2020 and 2018 trucks. Complaint counts drop for newer years, but newer trucks have had less time to collect them. The 2026 truck is too new to judge.
Is it safe to drive a Sierra 1500 with a Brake System Failure warning?
Owners describe pedals sinking to the floor and trucks that barely stop after this warning, with crashes reported. Treat it as unsafe. Park the truck and have a dealer inspect it. A restart may clear the message, but owners say the fault returns.
Is there a recall for Sierra 1500 brake problems?
Federal records list seven brake-area recalls. They cover vacuum pump assist and EBCM software on 2018 and 2019 trucks, caliper bolts on 2020 trucks, and a missing brake fluid warning on 2023 trucks. Check your VIN, because some owners say their failures were not covered.
What is the fix for Sierra 1500 brake failures?
Owners report dealers recalibrating the brake system, replacing the electronic brake module, or replacing the master cylinder and booster. Warnings often return after a reflash. Recall repairs are free of charge. The data gives no repair prices for out-of-warranty work.
Why does my Sierra show a Service Trailer Brake System warning with no trailer?
Owners of 2018 and 2019 trucks report this warning and a constant chime with no trailer ever attached, sometimes with a trailer brake fuse that keeps blowing. The data does not give a cause. Have a dealer scan the truck for stored codes.

Other GMC Sierra 1500 problems

More on the GMC Sierra 1500

See incorrect data? Report an issue